The mobile overhead crane is beautiful and something you will want to use at the facility for lifting purposes, but that does not mean you are going to run it blindly. You will want to have a daily checklist that is going to be used at all times to make sure the right things are being looked at beforehand. Daily checklist is very important for the long service life of lifting equipment.
Sometimes, you will hear about accidents that take place in factories because people are hauling items and then have not done their checks.
It is inexcusable to let this happen, so here is a simple checklist that you will be able to make the most of and ensure you are not doing something that could ruin everything.
1) Gear Checks
Begin with the gears as those are going to be doing the main lifting. You want to ensure everything is intact the way you want it to be. This is when you will be able to look at the rest of the checklist. The goal is always to have it prepared before you move ahead.
When you do this, you will be happier about the gear checks you are going with and how they are going to work for you in the end.
Think about this as you are setting things up earlier in the day to use the mobile overhead crane in correct way.
2) Power Source
Where is the power coming from? Some people get lazy here because they know the power source is not going to change. However, the biggest amount of damage that a person can see is often from the power source not being functional. You have to check the wires and everything that is going to the mobile overhead crane.
Make sure it is perfect as you would want it to be.
3) Light Weight Check
Grab a light weight with the mobile overhead crane and see how it does. Can it pick up the weight as you want and get it to a new spot or are you struggling? If there are issues with the light weight, what do you think is going to happen when you increase the load and get down to business?
It is going to snap under pressure, and that is a mess you don’t want to clean up.
So, you should look at this as an experiment to check if the machine is running as it should. If it is good to go then, you move to the next step. If it isn’t, then look to find the cause.
This is the checklist you are going to need when it comes to your mobile overhead crane, and it has to be followed. You cannot let it get to a point where you are going to hope that it can lift the weight. This is not enough at all, and you will hate the results.
You want to be sure about how you are going to lift the load as that is a must in this day and age. Once you have done this, you can move ahead.